三塘湖盆地中—下侏罗统煤层甲烷风化带划分

以三塘湖盆地中、低煤阶煤层含气量和主要气体成分为基础,结合盆地构造、沉积及水文地质特征,对汉水泉凹陷和条湖凹陷煤层甲烷风化带进行了划分,并对库木苏凹陷、马朗凹陷、淖毛湖凹陷和苏鲁克凹陷煤层甲烷风化带进行了预测。结果表明,三塘湖盆地甲烷风化带深度为400~1000 m.由于受东北冲断隆起带的影响,三塘湖盆地北部甲烷风化带浅于南部。沉积方面,盆地东部淖毛湖凹陷、马朗凹陷和条湖凹陷深湖—半深湖和辫状河三角洲成煤环境优于盆地西部汉水泉凹陷和库木苏凹陷扇三角洲成煤环境,盆地东部甲烷风化带普遍浅于西部;水文地质方面,条湖凹陷和马朗凹陷中开启性局部滞留水文地质单元形成的甲烷风化带浅于其他凹陷封闭性弱径流水文地质单元的甲烷风化带。初步预测马朗凹陷北部为下一步煤层气勘探开发的优势区块,条湖凹陷北部为下一步煤系气勘探开发的优势区块。     

裴沟煤矿典型断裂构造带水化学变化特征

断裂运动是错综复杂的地质作用，物质组成的变化能够通过水质中阴阳离子含量直观表现。以裴沟煤矿近20年来的突（涌）水点化验数据为依据探究各含水层水化学普遍性质，发现阳离子含量和矿化度可以作为水源判别的重要指标，以典型构造浮山寨断层为对象研究断裂构造带水化学变化特征，结果显示距离断裂构造带越近，水中Ca²⁺+Mg²⁺含量减小、Na⁺+K⁺含量增大、矿化度降低，揭示断层两盘不同含水层间水掺和程度。     

煤巷过断层破碎带施工工艺与支护技术实践

W1313回风顺槽在里程332 m处揭露正断层,对此采取了调整巷道顶板锚网索支护参数,采用圆木大板棚复合支护等措施,并加强了顶板、通风、掘锚机破岩、爆破作业和作业人员的安全管理,确保工作面过断层破碎带时的安全施工。     

Reducing treatment zone diameter in orthokeratology and its effect on peripheral ocular refraction

PurposeTo determine whether orthokeratology (OK) induced treatment zone (TZ) diameter can be reduced by altering OK lens design, and if so the impact of modifying TZ diameter on relative peripheral refraction (RPR).Methods16 subjects (mean age 23.4 ± 1.5 years; 8 female) completed the study. Standard (Control) OK lens design (PJ, Capricornia, Australia) or a modified version (Test) where the back optic zone diameter was reduced, and back optic zone asphericity and intermediate lens curves were altered, were worn overnight only for 7-nights in a randomised double masked order, with a minimum 1-week wash out (no lens wear) between lens designs. Full correction of refractive error was targeted. Refraction; best corrected visual acuity (BCVA); RPR (Shin-Nippon NVision-k 5001) along the horizontal and vertical meridians; and corneal topography (Medmont E300) were measured before starting lens wear and in the morning after lens removal after the seventh night of lens wear for both lens designs. TZ diameter and decentration was calculated from corneal topography.ResultsAfter 7-nights of wear both lens designs created -2.00D refraction effect with no significant difference in refractive effect or change to BCVA between the designs. The Test design created a significantly smaller horizontal (4.78 ± 0.37 vs 5.70 ± 0.37 mm, p < 0.001) and vertical (5.09 ± 0.51 vs 5.92 ± 0.51 mm p < 0.001) TZ diameter. The TZ was decentered inferior temporal with no significant difference between designs. There was no significant difference between the lens designs in RPR along the horizontal and vertical meridians at any measurement period.ConclusionsOK induced TZ diameter can be reliably reduced by altering OK lens design without detrimentally effecting lens centration or refractive effect. Reducing TZ diameter did not alter RPR, though measurement artifacts could be responsible for masking an effect. Longitudinal studies are needed to assess whether smaller TZ OK lens designs increase efficacy for slowing progression of myopia.     

Modeling the thermal shock induced cracking in ceramics

Prediction of surface cracking in ceramics due to quenching is performed numerically using either the coupled criterion or a cohesive zone model. Under such a thermal shock, a network of short cracks with minimal spacing between them initiate and propagate until some of them stop while the others continue propagating. The numerical implementation consists of a periodic array of cracks modeled by a representative volume element. It allows crack initiation, simultaneous propagation and period doubling to be predicted. The investigation of the crack period doubling allows a precise determination of the optimal crack spacing, which decreases with an increasing thermal shock amplitude. The predicted crack spacing results are in agreement with experimental measurements.     

破碎带单孔循环注浆钻进工艺及应用

针对破碎带深孔施工存在的塌孔、卡钻问题,介绍了单孔循环钻进注浆工艺和新型无机注浆材料,并进行了效果考察。单孔循环注浆钻进工艺只采用一个钻孔,通过循环钻进、退钻、注浆工艺,对破碎带分别加固;新型无机双液注浆材料通过改变水灰比,实现浆液流动和凝结时间调整,解决了不同深度破碎带注浆后快速套孔问题。     

曙光煤矿1226综采工作面瓦斯抽采技术

采用综合应用理论分析、现场实测的方法,对山西汾西集团曙光煤矿1226高瓦斯综采工作面瓦斯来源进行了分析,提出并实施了分区段“风排+煤层钻孔抽放+裂隙带钻孔抽放”的联合瓦斯抽采技术。现场监测结果显示:1226综采工作面上隅角瓦斯浓度控制在0.45%~0.75%,回风流中瓦斯浓度控制在了0.44%~0.75%,瓦斯治理效果明显改善。     

浮选机运输区的结构特征的测试研究

浮选机内各动力学分区的流动特征复杂。本文选取单槽容积0.2m3KYF型充气机械搅拌式浮选机为研究对象,采用PIV测试技术开展运输区的结构特征和动力学特征的研究。研究表明运输区在半个槽体的取截面内的轮廓形状整体呈现为左边为直线,右边折弯线,上下近似直线的近梯形结构,具有高度和宽度两个主要结构特征。运输区轮廓边界处的动力学特征存在明显差异。本研究加深了对浮选机运输区特征的理解,有助于通过调控运输区特征方法解决大型机械搅拌式浮选机粗粒矿物回收率低的难题。     

Zone model predictive control for pressure management of water distribution network

In the water distribution network (WDN), although the water demand of the node is changing constantly, the water quantity and water pressure of the node need to be met at each moment. To realize energy saving and consumption reduction, it is proposed to control the nodal water head of WDN in an appropriate narrow range. The frequent large fluctuation of the water demand, which may lead the water pressure exceed the expected range, increases the difficulty of the zone control. To realize optimized WND control, a novel zone predictive control is proposed, where two switching cases are considered. The switching condition is whether there are feasible solutions to keep the pressure within the expected region over the prediction horizon. When the condition is satisfied, the controller minimizes the variation of inputs with constraints of pressure range for ensuring the tank level staying within the expected zone and obtaining optimal economic cost. When the current pressure is out of the expected region or the condition is not satisfied due to the large variation of water demand, a reference trajectory of outputs is introduced, which is combined with the inputs as an optimization variable, and the constraints of expected zone are moved from the output to the introduced reference trajectory. Through minimizing the distance between reference trajectory and output, the controller will keep the tank level from deviating too far from the expected zone and will drive the tank level rapidly into the expected zone once the tank level exceeds the expected range. An application of the proposed zone MPC to WDN in Shinan District of Shanghai is given to illustrate its effectiveness.     

Determination of Metastable Zone Width and Nucleation Induction Period of Palm Oil and its Olein/Stearin in Melting Layer Crystallization

Measurement methods of metastable zone width (MZW) and nucleation induction time for melting layer crystallization of palm oil (PO) and its olein/stearin (POL/PST) were established, and the effects of cooling rate (corresponding to various supercoolings) on MZWs and induction time for melting layer crystallization of PO, POL, and PST were determined. The results indicated that the MZW coherently rose with increasing cooling rates with respect to PO and POL, while it declined with higher cooling rates for PST. The induction period results demonstrated that the nucleation induction periods of PO, PST, and POL decreased with increasing supercoolings, and the lag time for nucleation negatively correlated to the melting point of oils at the same supercooling. These data could offer significant instruction in designing and controlling the melting layer crystallization process for palm oil.